Place of Origin: | China |
Brand Name: | SKYLINE |
Certification: | CE |
Model Number: | SL-T32 |
Minimum Order Quantity: | 1 unit |
---|---|
Packaging Details: | plywood case |
Delivery Time: | 30 working days |
Payment Terms: | Western Union, T/T, MoneyGram |
Supply Ability: | 1 pcs/ month |
Name: | Chair Testing Machine | Controller: | PLC+ Touch Screen |
---|---|---|---|
Motor: | Air Cylinder | Standard: | ANSI/BIFMA X5.1-2011 12 Stability Tests BS EN 1335-3:2009 7.1.1 Front Edge Overturning BS EN 1335-3:2009 7.1.2 Forwards Overturning |
Weight: | 600N Increment | Seat Height: | 30 To 65cm |
High Light: | furniture testing machine,chair testing machine |
BIFMA Furniture Testing Equipment Office Chair Seat Stability Tester
Application
This machine is suitable to test the seats (such as chairs, office chairs) forward stability. The purpose of these tests is to evaluate the front and rear stability of chairs.
Principle
Put the test-piece on the test table, blocked the front leg, apply specified force with forward 20N applied at seat loading point, check the article tends to oventurn forward or not to determine the test-piece forward stability performance.
Install the loading basket under the table which is lifting by Pneumatic actuator, max loading capacity up to 150kg, the lift of cylinder is controlled by pneumatic attenuation device, Load-bearing basket adopt rubber cushioning device to ensure that fall to final position will not produce damage, the operation unit of table can control loading basket to rise or go down, dynamical movement can position device adjustment, easy to operation.
Technical parameter
a.Support fixture
Material:polypropyene
Dimension:1.5±0.4m(T)×356mm(W)×711mm(L)
b.Rear stability disk
weight:10±0.05kg
Dimension:350mm(dia.)×48mm(T)
The surface friction of the disk (disk to disk):sliding force shall be 31±9N
C.Template for real stability
Material:Nylon/3(thickness)×3(width)
weight:1.07±0.41kg
d.Front:stability loading disc:
Stability tests(ANSI/BIFMA X5.1-2017, clause 11)
Stability test(ANSI/BIFMA X5.4-2012, clause 21)
Loading basket can load the weights as bellows( loading basket weight is 10kg)
4kg for each piece, 28pcs(100x100x50mm)
2kg for each piece, 10pcs(100x50x50mm)
1kg for each piece, 4pcs(100x50x25mm)
Weight: 600N increment
Specification
A 79 kg (173 lb.) weight shall be placed on the seat at the center of the unit or on the
seating position nearest to the center of the chair
A block, obstruction or other restraining device 13 mm (0.5 in.) in height shall be
affixed to the test platform. The device shall prevent sliding but not restrict the unit
from tipping. On chairs that rotate, the base and casters shall be positioned to offer
the least resistance to rearward tipping of the chair
Loader: diameter 200mm.
Seat height: 30 to 65cm, manual adjustment
Testing Standards
ANSI/BIFMA X5.1-2011 12 | Stability Tests |
BS EN 1355-3:2009 7.1.1 | Front edge overturning |
BSEN 1355-3:2009.7.1.2 | Forwards overturning |
Contact Person: Kate Guo
Tel: 13310805373
Building Materials Flammability Tester NF P92-505 Melt Dripping Test Apparatus
ASTM E162 900 Celsius Building Materials Flammability Tester For Radiant Panel
Building Materials Flammability Flame Spread Tester
ASTM E1354 HEAT RELEASE CONE CALORIMETER WITH OXYGEN ANALYZER
Fire Testing Equipment Heat Transfer Index Test Apparatus
Wire And Cable Heat Release Test Device
UL Cable Vertical Tray Fire Testing Equipment
NFPA 1971-2007 Fire Helmet Fire Resistance Combustion Test Device
Automatic Ignitability Building Materials Flammability Tester For Building Materials
Foam Plastics Horizontal and Vertical Flammability Tester with MCU Control
Lab Building Materials Flammability Tester , UL1685 Vertical Tray Test Chamber for Cables