Send Message
SKYLINE INSTRUMENTS CO.,LTD

        Skyline Instruments Co.,LTD

 

                   We only manufacture Lab Testing Equipment

Home
Products
VR Show
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home News

Wooden Furniture Inspection Standards & Methods

China SKYLINE INSTRUMENTS CO.,LTD certification
China SKYLINE INSTRUMENTS CO.,LTD certification
Thank you for a very very fast quote. I'm really impressed.

—— Abdul Malek (Malaysia)

Dealing with the Seller was no problem at all. We are in Chicago IL and the order arrived in less days than I thought and everything was good. Thanks

—— Roger( America)

Very Good to deal with! Great Communication through Email. I got it in no time.....less than 5 days.....

—— Raymond(America)

We have recieved the equipment and done the first tests with it. It works without any problem and we are happy with the product quality. Many Thanks

—— Ercan Arslan (Turkey)

Thanks for your prompt reply and excellent customer service.

—— Lisa (America)

Confirming I have received the items and very happy with the quality. Thanks again and we will keep you in mind for future equipment!

—— David Kraus(America)

Always great to work with Skyline!

—— Tharrett Dallas

I'm Online Chat Now
Company News
Wooden Furniture Inspection Standards & Methods
Latest company news about Wooden Furniture Inspection Standards & Methods

In recent years, with the improvement of people's quality of life and the continuous improvement of the craftsmanship of wooden furniture, the demand for wooden furniture and wooden products is also increasing. At the same time, a problem has also been exposed. Due to the lack of management and the maximization of profits by illegal traders, In this context, a large number of unqualified wooden furniture floods the industry, such as the use of other wood materials in the custom-made furniture materials of Nanmu, the waterproof rate of wooden furniture is unqualified, or the physical and chemical properties of wooden cabinets are not good. Qualified, in this case, the relevant departments have customized a series of testing standards and methods.

 

Applicable product range:

Wooden Furniture Solid Wood Furniture Wooden Furniture Wooden Table Wooden Chair Wooden Cabinet Wooden Bed Wooden Coffee Table Wooden High Table

 

Wooden furniture reference standard:

GB/T 3326 Main dimensions of tables, chairs and stools

GB/T 3327 Main Dimensions of Cabinets GB/T 3328 Main Dimensions of Beds

GB4893.1~4893.9 Determination method of paint film on the furniture surface

GB/T10357.1~10357.6 Furniture Mechanical Properties Test

ZB Y80 002 Determination of peel strength of soft cladding materials on furniture surfaces

ZB Y80 003 Determination of peel strength of hard cladding materials on furniture surfaces

 

Test methods for how wooden furniture should be tested:

 

1. Visual and sensory inspection: It should be under natural light or approximate natural light in the range of 300-600 lx illumination (such as 40W fluorescent lamp), and the viewing distance is 700-1000MM.

 

2. Determination of wood moisture content: The error of the wood moisture content tester is not more than ±2%. The moisture content of wood should be determined at the sampling site or in the same area. Take the test piece at a position above 100MM from the ground, and select three parts at different positions. On each part, measure once at each of the three optional points, and obtain the average value measured on the three parts respectively. Take the larger average value as the measured value of the wood moisture content of the test piece.

 

3. Determination of main dimensions: 3M steel tape measure (or straight ruler) with an error of no more than ±0.6MM per meter should be used to measure the specimen placed on the flat plate (or on the flat ground).

 

4. Determination of warpage: A warpage measurement device with an error of no more than 0.1MM should be used. When measuring, place the appliance on the diagonal line of the test piece, measure the distance between the midpoint of the test piece and the reference straight line, and use one of the larger values ​​to stabilize the warpage.

 

5. Determination of the landing stability of the bottom corner: a feeler gauge should be used. When measuring, place the test piece on the flat plate, and measure the distance between a certain bottom angle and the flat plate.

 

6. Flatness measurement: The flatness measurement device with an error of no more than 0.03MM should be used. When measuring, place the instrument on the surface of the test piece to be measured. At the same time, select three parts with serious unevenness, measure the distance between the 0-150MM length and the reference line, and take one of the larger values ​​as the measured value of the flatness.

 

7. Determination of the verticality of adjacent sides: 3M steel tape measure (or straight ruler) with an error of no more than ±0.6MM per meter should be used. When measuring, measure the two opposite corners of the rectangular test piece with a rigid tape measure (or a rigid ruler), and the difference is the evaluation value of the perpendicularity of the adjacent sides.

Pub Time : 2022-08-30 15:33:42 >> News list
Contact Details
SKYLINE INSTRUMENTS CO.,LTD

Contact Person: Ms. Ivy Xie

Tel: 86-13751491529

Fax: 86-769-38818154

Send your inquiry directly to us (0 / 3000)