Natural climate, xenon lamp aging tester sunlight radiation is considered the main cause of coating aging, window glass under the exposure radiation principle is the same. Therefore for artificial climate aging and artificial exposure radiation, simulating sunlight radiation is essential. Xenon arc radiation source after one of two different light filtering systems to change the spectral distribution of the radiation it produces, respectively, to simulate solar radiation in addition and visible spectral distribution (method I), simulate the 3mm thick window glass filtered solar radiation after the ultraviolet and can be scenic spectral distribution (method II).

Then the following matters should be noted in the process of use

Precautions for use:

1, in the operation, unless necessary, please do not open the box door, otherwise it may lead to adverse consequences.

2, in order to provide the machine test products and operator safety protection, please regularly check the water pressure controller and circulation tank water level.

3, the correct device wet ball test cloth, in order to ensure the measurement of the correct relative humidity.

4、Please read this manual in detail before operating this machine.

Installation 

1、Installation location should consider the heat dissipation of Ben & and the location of the usual easy to check and repair

2、The distance between Ben and the wall and any other machines should be at least 600mm.

3、Set up on a flat and vibration-free ground.

4、Choose a well ventilated place, and do not be exposed to direct sunlight.

5、The machine should be away from heat source and flammable and explosive materials.

6、The power supply line and drainage pipe should be as short as possible.

7、Please choose a place with less dust and moisture and good ventilation for installation.