What is the use of Breakaway Feature Separation Tester ?
This unit is used to test whether, cords and chains on toys that can form a tangled loop or a noose, can be breakaway, or whether it complies with safety requirements after breakaway.
Fix one end of the cord or the strap. Apply a force of (25 ± 2) N vertically to the other end, along the axis of the cord or strap, in such a way that the breakaway feature is in the middle between the fixing points. Observe whether or not the cord, strap or breakaway feature separates.
Straps intended to be worn fully or partially around the neck
Toys with straps intended to be worn fully or partially around the neck and which create a fixed loop shall have
a breakaway feature which breaks when tested according to 8.38 (breakaway feature separation test)
This requirement applies only to straps intended to be worn fully or partially around the neck. Toy safety
harnesses, toy-backpack shoulder straps, and the straps of toy bag/bucket/box handles are not covered by this requirement
Straps of binoculars, guitars or other toys intended to be worn fully or partially around the neck are examples
of straps covered by this reqirement
|Standard accessory||25N weight 1pc|
Contact Person: Ms. Ivy Xie