IS9873-1 Mouth Actuated Toys Durability Tester Toys Testing Equipment
Mouth Actuated Durability Tester with Relif valve, the output pressure more than 13.8kpa the relief valve will release the pressure
This testing is suitable for testing the safety capability of Mouth Toys.
Satisfied conditions:create 295 ± 10cm3 gas volume within 5s at least,And can be alternately blowing and suction toys 10 times. Equipped with imported high-precision pressure gauge. Gas flow can control by the valve.
What are the safety requirements for Mouth Actuated Tester ?
1. Mouth toys and toy in which to remove the mouthpiece and cannot be a Widget
2. The un-removed mouthpiece in the mouth moving toys, run soaking test, the torque test and tensile test shall not create small parts
3.The mouth toys if they contain loose parts, when running the durability test shall not create small parts ( alternately blow and suction toys using 295 ± 10cm3 gas volume within 5 seconds and repeat 10 times)
4. Removable or cannot remove the mouthpiece of the balloons must comply with the requirements of 1 and 2
|Testing times||10 times|
|Gas-pressure meter||Digital,Units, Kpa, The positive and negative pressure display|
|Standards||ISO 8124-1 16 CFR 1500 ASTM F963 4.8 EN-71|
|Accessories||Tube gripper 2pcs|
|Display mode||LCD display|
|Blow-suction flow||295±10cm3/s adjustable|
|Counter||9，999 times, can be specified|
|Power supply||1∮，AC 220V，100W|
EN 71,GB/T 6675, ASTM F963,ISO8124-1
Contact Person: Ms. Ivy Xie