Send Message
SKYLINE INSTRUMENTS CO.,LTD

        Skyline Instruments Co.,LTD

 

                   We only manufacture Lab Testing Equipment

Home
Products
VR Show
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsFootwear Testing Equipment

Satra Tm92 Footwear Shoes Low Temperature Ross Flexing / Bending Tester

Satra Tm92 Footwear Shoes Low Temperature Ross Flexing / Bending Tester

  • Satra Tm92 Footwear Shoes Low Temperature Ross Flexing / Bending Tester
  • Satra Tm92 Footwear Shoes Low Temperature Ross Flexing / Bending Tester
  • Satra Tm92 Footwear Shoes Low Temperature Ross Flexing / Bending Tester
Satra Tm92 Footwear Shoes Low Temperature Ross Flexing / Bending Tester
Product Details:
Place of Origin: CN
Brand Name: SKYLINE
Certification: CE
Model Number: SL-E804
Payment & Shipping Terms:
Minimum Order Quantity: 1 unit
Price: Negoitable
Packaging Details: Plywood case
Delivery Time: 10 working days
Payment Terms: T/T, Western Union, MoneyGram
Supply Ability: 10 pcs/ month
Contact Now
Detailed Product Description
Power Supply: AC~220V 50Hz Temperature Range: Normal Temperature ~ -50ºC
Dimension: 109x100x163cm Weight: 420kg
Temperature Control Accuracy: ±0.3ºC Distribution Uniformity: ±1ºC
Cooling Speed: About 60min From Normal Temperature To -30ºC Refrigerant: R404 Environmentally Friendly Refrigerant
Compressor: French Taikang Compressor Start Delay: 5min
Power Consumption: 4-6KW
High Light:

satra tm92 leather flexing tester

,

satra tm92 shoes flexing tester

,

ross shoes flexing tester

Product information
Vertical type low temperature flexing tester is used to test if the materials such as leather, textile, rubber, shoes can endure the flexing at low temperature. Different fixtures can be installed in the inner box, and all the equipments are made of stainless steel..

Test Standards

ASTM D 1790, D 1593, 1052, JIS K6545, EN ISO20344, HG/T24I I, HG/T287I, GB/T2099I, CNS 7705, QB/T2224, QB/T 1471, DIN 53351, SATRA TM92, SATRA TM 161


Parameters

Inside and outside tank materia stainless steel SUS304#
Controller Japanese Omron PID control
Temperature range (I) Normal temperature ~ -50ºC (optional)
Optional inner box action add finished shoes with resistance to bending (heel up, heel up, ROSS twists), outsole resistance to twists and turns, leather flexure-resistant clamps, (or customized according to requirements)
Protection device thermal protection shutdown, leakage shutdown, over-temperature protection, overload protection and other functions
Temperature control accuracy ±0.3ºC
Distribution uniformity ±1ºC
Cooling speed about 60min from normal temperature to -30ºC
Refrigerant R404 environmentally friendly refrigerant
Compressor French Taikang
Compressor start delay 5min
Power consumption 4-6KW
Insulation material rigid foam and glass wool
Counter LCD, 0~9999, 9999 eight digits
Window 210×35×270mm, two vacuum layers
Window light P1 light, 5w
Power supply AC~220V 50Hz
Motor gear reduction motor
Inner box size 600×600×550mm (inner box size is determined according to the type of fixture installed)
Size (W*D*H 110×105×160cm
Weight about 420kg


Test Principle
A. The sole strip test specimen is installed on the Low temperature ROSS flexing tester, so that the cutout falls directly above the center of the rotating shaft of the Low temperature ROSS flexing tester, through the Low temperature ROSS flexing tester drive the test specimen on the shaft for free 90 degree zigzag, after a certain number of tests, the length of the test specimen cutout is measured, and the size of the cutout growth rate is used to evaluate the test sole resistance to zigzag performance.
 

B. Install the finished shoe on the finished shoe flex resistance tester, and drive the flex part of the finished shoe through the finished shoe flex resistance tester to repeatedly flex at a flex angle matching the shoe type and the fixed rate of the flex machine, and observe the damage of the flex part of the finished shoe after reaching the pre-set time or after completing the specified number of flexes, to complete the number of flexes without damage or to complete the specified number of flexes. The severity of the damage to the bending part of the finished shoe after completing the number of bends is used to assess the bending resistance of the finished shoe.
 

C. The test specimen is mounted on the VAMP flex test machine, and the flex test is carried out at a certain frequency by the VAMP flex test machine, and the changes on the surface of the test specimen are observed to evaluate the flex resistance of the test material by whether the surface is wrinkled and broken and its severity.

 


A. Technical parameters:
1. Conform to the standards: GB/T20991-2007 , ASTM D1052, ISO 5423, SATRA TM60, etc.
2. Bending angle: (90±2)º.
3. Bending speed: (0 to 150) r/min adjustable, display speed.
4. 2 specimens can be tested at the same time.
5. Bending axis diameter: 10mm.

 

B. Technical parameters:
1. Standard: SATRA-TM92 and other standards. 2.
2. bending angle: (0 to 90)º adjustable, marked angle: 30 °, 45 °, 60 °. 3.
3. bending speed: (0 to 150) r / min adjustable, display speed. 4.
4. Allowable specimen length: 150 to 400mm. 5.
5. 2 whole shoes can be tested at the same time.

 

C. Technical parameters:
1. Comply with the standards: GB/T20991, EN ISO20344, SATRA TM25, ISO-4643, etc.
2. Stretching stroke: (19±1.5) mm.
3. Bending speed: (0 to 300) r/min adjustable, display speed.
4. Specimen size: (64±1)x(64±1)mm.
5. Number of test pieces: 8 specimens are tested at the same time.

 

Contact Details
SKYLINE INSTRUMENTS CO.,LTD

Contact Person: Charlie

Tel: 13310806019

Fax: 86-769-38818154

Send your inquiry directly to us (0 / 3000)

Other Products