|Place of Origin:||China|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||plywood case|
|Delivery Time:||10 work days|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Supply Ability:||1 unit / month|
|SKYLINE:||45 Degree Automatic Flammability Tester||Standards:||ASTM D1230, FTMS191-5908, CFR 16-1610, CALIF TB117|
|Ignition Time:||0.1s Can Be Set||Dimension:||400 X 300 X 500mm (L*W*H)|
ASTM D1230 Flammaility Testing Equipment 45 Degree Automatic Flammability Tester
45 Degree is used to evaluate compliance of fire-retardant products with fire-retardant performance standards according to the combustion method, and measures combustion characteristics such as After Glow and After Flame of test specimen installed at a 45-degree angle.
45˚ Flammability tests After Flame Time and After Glow Time of specimen by heat in the chamber.
This measures flame retardance about specimen of less than 5 mm thick (Board, Plate, Sheet, Film and so on) by 45˚ Micro and Airmix method and evaluates materials about 3rd grade of flame retardance (less than 15cm and 5 seconds)
To determine the burning characteristics of textiles under controlled conditions. Stainless steel test cabinet with glass observation panel provided with automatic timing of flame spread in 0.1-second increments from ignition. Brushing Device including Spare Nylon Brush.
|Ignition time||1s or set it Set arbitrary|
|Dimensions||400 x 300 x 500mm (L*W*H)|
|Power||AC 220V / 50Hz / 2A|
|Standards||ASTM D1230, CRF 16-1610|
|• KS F 2819 : Testing Method For Incombustibility Of Thin Materials (Testing Method for incombustibility of thin materials for construction)
• ASTM D 1230 Canadian Minimum Flammability Standards for most fabrics
• NFPA 702 Forced edge ignition of fabrics cited by California for Hospital Apparel and Bedding Fabrics
• CA TB 117 (2000) Upholstery Fabrics (Section E) Synthetic Filling (Section C)
• BIFMA Upholstery material screening test