ISO9772 Lab Testing Equipment Horizontal And Vertical Flammability Tester With MCU Control

Application

Suitable for laboratory conditions under the ISO 845: 1985 measured by the density of less than 250kg / m3 of small plastic samples under small flames in the horizontal combustion performance.

Standards 

ISO9722 ISO 97738

Specification

1. Ambient temperature: -10 ℃ ~ 30 ℃
2. Relative humidity: ≤85%
3. Power supply voltage and power: 220V ± 10% 50HZ power less than 100W
4. MCU control, read the automatic timing.
5. Bunsen burner diameter: 9.5mm ± 0.3mm Bunsen burner can be tilted in the range of 0-45 °
6. Bunsen light blue flame height: 15mm-100mm can be adjusted, with a flame height scale
7. Sample folder vertical adjustment distance: ≤ 100mm sample holder horizontal direction adjustment distance: ≤ 70mm
8. Horizontal sample holder can be placed 90 ° textile samples folder (optional)
9. Bunsen burner automatic ignition time: any set
10. Gas source: industrial methane gas, the concentration of not less than 98%, calorific value (37 +1) MJ / m³, need to bring the regulator and pressure gauge to ensure uniform airflow. Other sources of heat (37 + 1) MJ / m³ mixed gas source or calorific value of (94 +2) MJ / m³ of propane gas can also get similar results. In the event of controversy, industrial grade methane gas should be selected.
11. Overall dimensions: width 1160mm × depth 600mm × height 1310 (including feet) mm
12. Combustion test area volume:> 0.5 cubic, long * wide * high about 900mm × 590mm × 1050mm, background black, background illumination ≤ 20Lux.

Accessories

1.Power cord 1
2.Igniter only 1
3. Horizontal pattern rack 1
4. Vertical sample rack 1
5. Air supply pipe 1.5
6. Spare scale only 1

Foam Plastics Horizontal and Vertical Flammability Tester