ISO 3679 Lab Testing Equipment Flash Point Tester Close - Cup Type

ISO 3679 / EN71-2:2011+A1:2014 Flash point tester (close-cup type)

Product information

It is a automatic closed flash point tester, can rapid test flash point of coating, paint (water-based paint), varnish, lacquer base, adhesive, solvent, Fatty acid methyl ester (FAME), chemical reagent, flavor, spices, solid chemical products, viscous chemical products, air fuel oil,petroleum and related products.

Function Overview

Instrument can detect the flash point at a specific temperature between -0 ℃ and 100 ℃ (-30 ℃ -300 ℃ optional) or at average rate heating.

All functions are achieved through the membrane keypad and digital display.

Users can select the built-in test procedures or set its own test parameters, you can modify the default program to implement custom non-standard test.

Various parameters, such as the heating mode, time, temperature and the average rate heating can be set by the user themselves.

Planning board action, the decline of the ignition, the detection of flash point is done automatically. A voice is prompted to user at each operation, at the end of the test there will be voice prompts, too.

The gas ignition sources can be provided directly by the laboratory, you can also use the portable butane gas tank. Built-in cooling module is used to shorten the cooling time between the two tests.

Technical parameters