16 CFR 1611 Vinyl plastic film flammability tester ,SPI Flammability Tester
SPI Flammability Tester, to determine the ignition properties of vinyl plastic film material according to CFR 16 Part 1611 - U.S.A. Flammable Fabrics Act for flammability of apparel vinyl plastic film.
The rate of burning shall not exceed 1.2 in./s as judged by the average of five determinations lengthwise and five determinations transverse to the direction of processing, when specimen is placed at an angle of 45 degree and expose to the standardized flame (22# fire nozzle, 1/2 inch. In length).
The most advanced thread locking device and sample holder save 80% of operation time that faster than other suppliers’ design
Equipped with photoelectricity sensor accurately and automatically record burning time with no damage ensures 5 years life or longer
Timer accuracy up to 0.01 second;22# needle flame, 9/16inch from the specimen, flame length adjusted by flow-valve;
Test box 30cmX25cmX37cm, 5pcs x 20mm vents on the left and right sides
The nozzle is 9/16" from the surface of the sample"
| Timing distance of burning
|| 6 inch
| Sample holder
| Marker line spacing
| Flame length
| Sample size
| Volume (WxDxH)
| Weight (approx.)
| Power supply
|| 1∮ AC 220V 50Hz 3A
set of main machine. Completed with cabinet, flow-meter, timer, transparent viewing window, etc.
1 set of sample holder
20 White cotton threads
l 1 Sample cutting template
5 22# Fire nozzles
Standards CFR 16 Part 1611